Products

Semi-auto Split Type CIP System

Semi-auto Split Type CIP System

Semi-auto Split Type CIP System

1. Cleaning liquid can be heated automatically.
2. The working principle of semi-auto split type CIP system can be presented as follows:
first, set the cleaning temperature through the temperature control meter;
then, control the amount of steam to keep the cleaning liquid at the required temperature through controlling the open frequency of the steam control valve.
3. The liquid level of the tanks in the semi-auto split type CIP system adopts automatic alarm system.
4. Concentrated acid and alkali can be added manually when the concentration of cleaning liquid reduces.
5. The cleaning process transforming is performed through operating the relevant pipelines and valves by manual.
6. If the water is not enough, workers should add water into the tank.

More Information about Semi-auto Split Type CIP System
Tank size 1000L-10000L
CIP tank type Alkali tank, acid tank, hot water tank, clean water tank, water recycle tank
Cleaning recycles Single circuit, double circuits, three circuits, four circuits
Heating method Coil pipes inside, plate, tubular
Automatic types and characteristics Full Automatic 1. flow rate auto control; 2. temperature auto control; 3. auto compensate the CIP liquid level; 4. auto compensate the liquid concentrate; 5. cleaning liquids auto transfer; 6. auto alarm
Semi-auto control 1. temperature auto control 2. electrical control with manual operate the other matters.
Manual operation manual operate on the cleaning process
Feedback Form
>> Related Products
    1. Semi-auto Split Type CIP UnitSemi-auto split type CIP unit is usually installed on a frame and supporter which makes it easy to transport especially when exporting material.
      Cleaning liquid can heat automatically.
      ...